10
The plastic collar strap can be removed and replaced with the spare nylon strap that comes
with the packaging. See page 13 for detailed instructions on how this is done.
Press the blue “On/Off” button at the front of the collar. If a solid
green
light stays on after
momentarily flashing in green and red color, it indicates that the collar is ready for use.
10. Sound/Tone Function
The sound button on the remote transmitter is the trigger for a tone signal on the receiver
collar. Each time the sound button is pressed, provided that the collar and the remote
transmitter are both switched on, a single tone signal will be generated. The collar is pre-set
with only one level of tone signal, so unless the function dial has been parked at the OFF
position, all other positions on the function dial will generate the same identical tone signal
when the sound button has been pressed. If the sound button has been held down, a
continuous stream of tone signals will be generated with a short time gap between each tone
signal.
Press
11. Vibration Function
The vibration button on the remote transmitter is the trigger for a vibration response on the
receiver collar. Each time the vibration button is pressed, provided that the collar and the
remote transmitter are both switched on, a single vibration response will be triggered. The
collar is pre-set with only one level of vibration response, so unless the function dial has been
parked at the OFF position, all other positions on the function dial will generate the same
identical vibration response when the vibration button has been pressed. If the vibration
button has been held down, a continuous stream of vibration responses will be generated
with a short time gap between each vibration response.
Sound Activated Sensor
On/Off
Button
Sound Activated Sensor
On/Off
Button
