DDN Storage StorageScaler8460, Manual

Page: 8 / 24

4. Remove the four screws (2 per side) that secure the SS8460 to the rack front.
Figure 5.
Figure 5. Rack Securing Screws. 4 per SS8460
5. Use step ladders supplied with the FRU enclosure for upper rack U locations
as needed.
6. Verify that the cables and cable arm assemblies are such that cables won’t
get hung up and pulled on when the enclosure is removed.
7. Slide the enclosure out from the rack by pushing in the two release tabs on
front of the enclosure (Figure 6). Keep pulling until the enclosure locks and
you hear a clicking
.
The unit should now be out enough to open top covers.
Figure 6. Release Tab on Enclosure Front