Title: RF Test Report for 3G MOBILE PHONE
Main Model: AC4E
Serial Model: ANDY AC4E, AC4EW
To: FCC Part 15.247: 2013, ANSI C63.4: 2009
Report No.: 13070549-FCC-R3
Issue Date: December 06, 2013
Page: 9 of 74
www.siemic.com.cn
412
.
2
5
/
55
.
6
437
.
2
5
/
83
.
5
462
.
2
5
/
25
.
5
5
MEASUREMENTS, EXAMINATION AND DERIVED
RESULTS
5.1
§15.247 (i) and §2.1093 – RF Exposure
Standard Requirement:
According to §15.247 (i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a
manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s
guidelines.
Routine SAR evaluation refers to that specifically required by § 2.1093, using measurements or computer simulation.
When routine SAR evaluation is not required, portable transmitters with output power greater than the applicable low
threshold require SAR evaluation to qualify for TCB approval.
Two antennas are available for the EUT (GSM/UMTS antenna and WIFI/Bluetooth/GPS antenna).
The maximum average output power(turn-up power) in low channel of WIFI is 8.16 dBm= 6.55 mW
The calculation results= = 2.03 < 3
The maximum average output power(turn-up power) in middle channel of WIFI is 7.66 dBm= 5.83 mW
The calculation results= = 1.82 < 3
The maximum average output power(turn-up power) in high channel of WIFI is 7.20 dBm= 5.25 mW
The calculation results= = 1.65 < 3
According to KDB 447498, no stand-alone required for WIFI antenna, and no simultaneous SAR measurement is
required .
Test Result: Pass
The SAR measurement is exempt.
