3
System Start-up
SoloMobile is powered via a power cable dedicated to the system. The power cable provides op-
erating power and a protective safety ground connection for both the gantry and the acquisition
PC. The system battery is able to keep the system powered and the PC running for approximately
one hour. The system powering status is displayed in the power display. For details, see Power
Display.
To power up the gantry and the system PC:
1.
Make sure that the system circuit breaker is switched on.
2.
Switch on power by setting the system's main switch in the gantry base in ON (I) position.
3.
Press the System PC’s power switch.
Note:
The System PC takes approximately two minutes to load the system software. Do not
press any keys during this booting process.
4.
On the System PC’s desktop,
click
Operator
to start the system software.
WARNING - SYSTEM WARM-UP TIME
If the system power has been switched off for more than one hour, a warm-up period is re-
quired before the system is ready for normal operation. As a rule, leave the system to warm up
for the same period of time that it has been without power. However, the system will never
need to warm up for more than 5 hours.
For details on performing a patient study, see Performing a Patient Study.
3
How to access the SoloMobile eIFU
The SoloMobile Instructions for Use in English are available electronically to the user in the fol-
lowing way:
Insert 9MAN2793 SoloMobile User Documentation CD provided with the system in the
CD-ROM drive and select the SoloMobile Instructions for Use.
A paper-based version of the Instructions for Use in English (1MAN2700) can be requested from
your Distributor or from the DDD-Diagnostic A/S by email to [email protected].
4
How to handle emergency situations
During the use of SoloMobile, an emergency situation may occur in which it may be necessary to
Summary of Contents for SoloMobile
Page 7: ......