DDD SoloMobile, User Intro Leaflet, Page: 4 / 8

2
1
SoloMobile User Intro Leaflet
The Instructions for Use (IFU) for SoloMobile are provided electronically (eIFU).
This leaflet describes the basic steps on how to start up the system and get hold of the eIFU as
well as other important information. The leaflet may contain references to sections in the eIFU.
Please turn to the eIFU for details.
2
How to start SoloMobile
Connecting SoloMobile
The SoloMobile battery allows the unit to operate for at least 60 minutes, provided the battery is
fully charged. For details, see Power Display. However, it is recommended that the unit be
plugged in except during transport.
Note:
Leaving the system unplugged after use can shorten the lifetime of the battery seriously.
Caution: Do not run over the cables during transport or when positioning the camera for acquisi-
tion.
Setting up SoloMobile for acquisition:

Connect the power cable into the wall socket.

Switch on the Main power switch.

Connect the network cable to establish contact to the local area network.

Connect the ECG gate, as necessary.

Start up the system. For details, see Starting up SoloMobile on page 3.
For further details, see Getting SoloMobile Ready for Acquisition.