DCS WD-27-SS-OD, Use And Care And Installation Manual, Page: 9 / 44

7
INSTALLATION INSTRUCTIONS
SPECIFICATIONS
The cabinet depth from the outer edge of the face frame to the inside back of the cabinet or wall should be at
least 23-7/8 inches (see figure 02).
The Warming Drawer should be installed into a base cabinet with minimum outside dimensions of 13-1/4” high
by 27” wide by 24” deep (see figures 03 & 04).
Power supply required: 120 VAC; 15 amp minimum GFI (Ground Fault Interrupt) circuit
A 120 Volt AC (GFI)
outlet should be
located below the
Warming Drawer
1-1/2” min. to
bottom of
countertop
2x4’s or similar
support
23-7/8” min. cabinet depth
2 5 -3/8”
11 -3/ 4 ”
POWER
CORD
DRAIN
28-7/16”
25-1/4”
23-11/16”
11-11/16”
2
12-1/4”
13-1/4”
2
26-5/8”
1
Fig. 02
Fig. 03
Fig. 04
CUTOUT DIMENSIONS