HEADER
A Special Message to our Customers,
We are glad you selected one or more of these DCS
Professional Appliances. By following a few simple proce-
dures and suggestions in this manual, these appliances will
give you years of service.
This booklet explains the proper use of your new appli-
ances and how to take care of them. Keep this manual in a
handy spot, as it has the answers to the questions that
occur when you start to cook.
Let us know if we can help you. When you write, please
include the model number of your appliance.
Sincerely,
DCS
WARNING:
If the information in this manual is not followed exactly, a
fire or explosion may result causing property damage, per-
sonal injury or death.
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS
·
Do not try to light any appliance.
·
Do not touch any electrical switch; do not use any
phone in your building.
·
Immediately call your gas supplier from a neighbor’s
phone. Follow the gas supplier’s instructions.
·
If you cannot reach your gas supplier, call the fire
department.
*
Installation and service must be performed by a qualified
installer, service agency or the gas supplier.
PROPANE GAS INSTALLATION
:
Each unit is ready for use with natural gas. It may be con-
verted for use with propane gas by a qualified service tech-
nician or installer. Be sure the unit being installed is correct
for the type of gas being used.
Caution:
When connecting the unit to propane gas, make certain
the propane gas tank is equipped with its own high-pres-
sure regulator; in addition, the pressure regulator supplied
with the unit must be on the
inlet gas pipe of the unit.
The maximum gas pressure to this appliance is not to
exceed 14.0 inches water column from propane gas tank
pressure regulator.
TESTED IN ACCORDANCE WITH ANSZ 21.1-1987
STANDARD FOR HOUSE-HOLD COOKING GAS
APPLIANCES.
To be used in conjunction with a suitable vent hood only. See
page 15.
Check your local building codes when installing this unit.
In the absence of local codes, this unit should be installed
in accordance with the National Fuel Gas Code No.
223.1-1990 and the National Electrical Code ANSI/NFPA
No. 70-1990.
10
USE & CARE INSTRUCTIONS
