manualshive.com logo in svg

DCS BGB36, Installation Instructions And User Manual

Share
Download
DCS BGB36 Installation Instructions And User Manual Download Page 24

22

❏

   Specified clearances main-

tained to combustibles.

 ❏

   Verified proper enclosure 

ventilation.

 ❏

   All internal packaging and 

any adhesive residue  
removed. To remove stub-
born residue, use rubbing 
alcohol or a commercially 
available adhesive remov-
er.

❏

    Removed shipping brack-

ets.

 ❏

   Knobs turn freely, bezels 

centered.

 ❏

  Each burner lights satis-

factorily, individually or 

with adjacent burner lit.

 

 ❏

    Air shutters adjusted.

 ❏

   Low flame setting  satis-

factory.

 ❏

    Drip pan in place properly 

and sliding freely.

❏

    Heat Shields are located 

properly and in place.

 ❏

   Pressure regulator con-

nected and set for 1 kPa 
Natural, 2.75 kPa LPG gas.

❏

   Manual shut-off valve    

installed and accessible.

❏

   Unit tested and free of  

leaks.

❏

    User informed of gas 

supply shut-off valve 
location.

❏

    All radiants are assembled  

and put in place.

❏

    Check match lighting.

■

  PLEASE LEAVE THESE  

INSTRUCTIONS WITH THE 
USER.

■

  USER, PLEASE RETAIN  

THESE INSTRUCTIONS  
FOR FUTURE REFERENCE.

INSTALLATION

INSTALLER CHECKLIST

Summary of Contents for BGB36

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands