DCS BGA27-BQ, Use And Care Manual, Page: 11 / 35

10
ROTISSERIE
10"
(minimum for sides
with rotisserie
motor clearance)
rotisserie
motor
(with rotisserie motor mounted)
(lid)
3"
(to non-
combustible
construction /
minimum lid
clearance
)
12"
(to combustible
construction)
grill
exhaust
27-3/8"
(cutout)
34"
27-3/4"
25"
26"
10-3/8"
22-3/4"
25"
ROTISSERIE
6"
(to left and
right side of
grill to non-
combustible
construction)
(lid)
27-3/8"
(cutout)
27-3/4"
6"
(minimum to
side of grill
to non-
combustible
construction)
GENERAL:
The Grill is designed for easy placement into masonry enclosures. For non-combustible applications
the grill drops into the opening shown in (Fig. 04, page 11). A deck or ledge is required to support it
from the bottom. When using the insulated jacket in a combustible enclosure application, (Fig. 04,
page 11). The jacket assembly must be supported from the bottom by a ledge on each side or a solid
deck beneath the entire grill or insulated jacket.
Review the detail drawings shown and take into account the provisions shown for gas line hook-up
clearance in the left rear corner. It is recommended that ventilation holes are provided in the enclosure
in the event of a gas leak. The supporting ledges or deck must be level and flat. The counter should
also be level.
FIG.03
BUILT–IN GRILL CLEARANCES