manualshive.com logo in svg

DCS 900E, User Manual

Share
Download
DCS 900E User Manual Download Page 38

dCS 900E / 902E

 User Manual

 Manual for Software Versions 1.3x to 1.5x

dCS

 Ltd 

12

th

 June 2000

Manual part no: DOC0029021E1

Page 38

Document No: OS-MA-D0002-902.1E1

Contact 

dCS

 on + 44 1799 531 999 

email to: [email protected]

(inside the UK r 44 with 0)

web site: www.dcsltd.co.uk

9th Order Noise Shape Plots

-84

-78

-72

-66

-60

-54

-48

-42

-36

-30

-24

-18

-12

-6

0

6

12

18

24

30

36

1

10

100

Frequency (kHz)

Noise Amplitude (dB)

32 kS/s

44.1 kS/s

48 kS/s

88.2 kS/s

96 kS/s

176.4 kS/s

192 kS/s

Figure 21 – 9

th

 Order Noise Shapers implemented on 

dCS 90X

The noise shaper plots above are all on the same vertical scales for easy
comparison, and the vertical grid is approximately 1 bit per grid line. Note that
for the audio band, 9

th

 order noise shaping at 176.4 kS/s or 192 kS/s gives huge

gains (8 bits or more).

This means that recording these formats on 8 channel 44.1 kS/s or 48 kS/s
recording machines that store only 16 bits is quite practical, and there is, in
practice, very little quality loss.

Summary of Contents for 900E




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands