DCN WL8200-X2 Operation Manual Download Page 56

Page: 56 / 62

- 55 -

Client Name: This field displays the client name that has obtained the IP

address.

MAC Address: This field displays the MAC address of the client that obtained

the IP address.

IP Address: This field displays the IP address assigned by the DHCP server to

the client host.

Effective Time: This item refers to the lease period of the IP address obtained by

the client host. Each IP address has a certain lease time, and the client software will

automatically renew the lease before it expires.

Status: The online / offline status of the client that has obtained the IP address

is displayed here.。

5.6.3

Static IP Distribution

Click "DHCP Server">>"Static IP Distribution" on the left menu to manually set

a static IP address.

The static reserved IP address assignment function can reserve IP addresses for

Summary of Contents for WL8200-X2































































Search results

Summary of Contents for WL8200-X2

Reviews:

Related manuals for WL8200-X2

Brands by name

Popular brands

DCN WL8200-X2, Operation Manual

Search results

Summary of Contents for WL8200-X2

Reviews:

Related manuals for WL8200-X2

Brands by name

Popular brands