- 47 -
5.3
Network Parameter Settings
5.3.1
LAN Port Setting
Click "Network Parameters">> "LAN Port Settings" on the left menu to set the
LAN side IP address and subnet mask. When the LAN port IP parameters are
changed, to ensure that the DHCP server can work normally, the address pool,
static address set in the DHCP server and the new LAN port IP should be on the
same network segment. After saving the settings, please enter IP address to visit
this page.
As shown below:
MAC Address: The MAC address of the AP to the LAN is used to identify the
local area network and cannot be changed.。
IP Address: The IP address of the AP to the LAN. The factory default value of
