6
S
E
Display (SED™)
1. Install battery pack.
2. Connect antenna.
3. Press the push button to power on; the
display enters the
Remote Mode
locating screen.
SED Remote Mode Locating Screen
This screen shows the data the Tx is sending to the receiver. Use
this screen during drilling.
SED Main Menu
Press the push button to access the Main menu. Use the button to
click through menu options, hold to select. To return to Remote
Mode, select the first icon or wait three seconds.
SED Settings Menu
Use the Settings menu to set telemetry channel, receiver, or region
to match the receiver.
Push
button
Settings
Remote Mode
Power off
Contrast
Information
Telemetry
update meter
Tx pitch
Tx roll
Tx temp.
Battery status
Telemetry channel
Tx battery strength
Roll offset on
HAG
Predicted distance
to receiver
