Instruction Manual HSM2895 GROOMING KIT 14 IN 1
dcg16.it
18
Beard guards
Attach a hair guard to the precision trimmer to evenly trim the hairs
on your face. The product comes with 3 beard guards(1mm,2mm,3-
7mm).The hair length settings are indicated on the guards.The
settings correspond to the remaining hair length after trimming.
NAPE OF NECK:
1.Using a hand-held mirror is necessary if self-trimming.
2.Lift hair off neck, using index finger to cover & protect hairs NOT
needing trimming .
3.Carefully touch cutting blade to neck, slowly moving the groomer
in an upward direction until stopped by index finger.
EARS:
1. When trimmer inner ears, avoid inserting Grooming System more
than 1/4” into ear canal.
2. Pull up ON/OFF button while gently moving in and out of ear
canal.
NOSE:
1. Carefully insert groomer no more than 1/4” into nostril.
2. Pull up ON/OFF button while gently moving in and out of nose.
SHAVING
1 Pull up the ON/OFF button
2 Move the shaving heads over your skin when your hair is short than
1mm.Make straight movements ,Do not make circular movements.
WET SHAVING
1 You can also use this shaver on a wet face.
2 to shave with shaving foam or shaving gel,follow the steps below:
a. Apply some water to your skin
b. Apply shaving foam or shaving gel to your skin
c. Rinse the shaving unit under the tap to ensure that the shaving unit
glides smoothly over your skin
d. Move the shaving heads in circular movements over your skin .
e. Dry your face and thoroughly clean the shaver after use
