page 11
Using multiple Cobalt
D
Box for separated Accessory bus & Power Districts!
f
t d A
If you like the idea of a separated DCC Track bus
and
Accessory power bus - or if you have a
ODUJHUOD\RXWWKDWPLJKWEHQHÀWIURPVHSDUDWHSRZHUGLVWULFWVHDFKZLWKLWVRZQSRZHUERRVWHU
and overload protection, then Cobalt
D
Box will do it for you, no matter which brand you use!
This diagram shows how to add an Accessory power bus or multiple power districts using Alpha
D
Box.
Subject to the use of the correct adapter leads (see page 26~27) this will work with ANY DCC SYSTEM AT ALL..
ANY Brand of DCC SYSTEM
that has both...
TRACK POWER
and
COMMAND BUS Outputs
COMMAND
BUS
TRACK
POWER
Connect TRACK power
Connect DCC BUS
Switch Set to TRACK
Base Station
BRAND ADAPTER
See P26~28
Hand Set
BRAND ADAPTER
See P26~28
Alpha
D
Power
or
5-Amp Power
Supply 15~18v DC
Alpha
D
Power
or
5-Amp Power
Supply 15~18v DC
Need information or help?
Visit www.dccconcepts.com/manuals-advice OR email [email protected]
Power District #1
Power District #2
Isolation
GAP
DCCconcepts 6-wire RJ12 lead
