18
5.4.16 Type
The Type (TY) command displays information about the host
multiplexer. The Remote Type (RTY#) command is used to display
similar information about a specific drop. The drop number must be
included on the command line.
5.4.17 Repeat Last Command
To repeat the last command, simply press the
*
key. This is handy for
repeating screens of constantly changing data.
5.4.18 Disconnect NMP
The BYE command toggles the RTS output from the Network
Management port. This is used to disconnect equipment such as dial-up
modems or the DCB Access Switch.
5.4.19 Test Tools
The Test Tools (TT) menu summarizes the test and troubleshooting
commands. These commands are listed separately to reduce the clutter
in the main help list, but are always active at the command prompt.
COMMAND
LOCAL REMOTE PARAGRAPH
Capture Port
CA#
RCA#
5.4.20 & 21
Copy Command
CC#
RCC#
5.4.22 & 23
Show RS232
SR
RSR
5.4.24 & 25
Test Message
TM#
RTM#
5.4.26 & 27
Remote Test Loop
RTL#
5.4.28
Monitor Port TX
MT#
5.4.29
Monitor Port RX
MR#
5.4.29
NMP Parity
P
5.4.30
Drop History/Clear
DH/CH
5.4.31
Drop Restart Polling
DR
5.4.32
Kill Drop Polling
KD
5.4.33
Suspend Drop Polling
SD
5.4.34
Poll ALL Drops
PA
5.4.35
Port Reset
PR
5.4.36
Reset MUX
RESET
RRESET
5.4.37
