5-Channel Bluetooth Looper
–
User Manual
©2019 DC Pedals. All Rights Reserved. r3.1
Page 4 of 12
the operation of the footswitches for the new mode.
This feature enables you to “play out” of a
preset and
make real-time adjustments to your tone if the song flow or set changes. Then with a quick press of the
Mode switch and a Channel switch and you are right back into the preset. This one-button Live Mode feature
is available only in DC Pedals designed loopers.
Bank Switch:
The Bank switch is active in both Live and Preset Modes but behaves differently in each mode. In Preset
Mode, pressing the Bank switch will cycle through the five banks of presets. An RGB LED shows the active
Bank. The color indicators are Blue (1), Green (2), Red (3), Yellow (4), and White (5). There are five Presets
in each Bank.
To change the current Folder, hold the Bank switch for 2 seconds. Loop LEDs 1-4 will light and the currently
selected folder will blink. Press Channel switch 1-4 to select a Folder. The corresponding LED will blink after
the Folder is selected. Also, the corresponding Folder LED will blink each time the Looper is powered ON.
In Live Mode, pressing the Bank switch activities the TIP function on the TRS jack. The TRS functions can be
latching or momentary.
The Tuner Switch:
The Tuner switch is similar to the Bank switch in that it behaves differently in Preset and Live Modes. In
Preset Mode, pressing the Tuner switch mutes the audio at both the input and output of the loops. This stops
any stray audio from getting into your delays and reverbs and keeps your amp quiet. The audio is still sent
through a buffer and to the Tuner-Out jack.
In Live Mode, pressing the Tuner switch activities the RING function on the TRS jack. The TRS functions can
be latching or momentary.
The Tuner switch can be changed to a Bank Down switch by holding the Tuner switch in Preset Mode. This
setting is retained during power cycles.
Channel Switches:
In Live Mode, the Channel switches toggle the corresponding loop on or off. In Preset Mode, the Channel
switches recall the saved preset stored in that preset/bank/folder. In Save Mode the Channel switch will
store the current setting (preset) into that preset, bank, and folder.
To access the TRS TIP function in Preset Mode, press switches 1 & 2 at the same time. LED 4 will blink to
confirm the TIP action. To access the TRS RING function in Preset Mode, press switches 2 & 3 at the same
time. LED 5 will blink to confirm the RING action.
Live Mode:
When in Live Mode, the looper operates just like a traditional true-bypass looper. Each Channel switch
toggles the corresponding loop on/off. The Mode LED is Green when the looper is in Live mode. The Bank
switch activates the TRS TIP function and the Tuner switch activates the TRS RING function.
Preset Mode:
When in Preset Mode, you can use any Channel switch to control any combination of loops. The Channel
switches set the looper to a Preset. A Preset is simply a definition of active loops and TRS functions. No
Summary of Contents for 5-Channel Bluetooth Looper
Page 1: ...User Manual...
