5-Channel Bluetooth Looper
–
User Manual
©2019 DC Pedals. All Rights Reserved. r3.1
Page 12 of 12
Factory Reset:
To restore the looper to factory settings, power OFF the looper. Then press and hold the Mode switch AND
the Channel 1 switch and apply power. Make sure you hold both switches during power-up. The Mode LED
will toggle until you release both switches. Release the switches and the Mode LED will toggle faster. Then
press the Mode switch again to reset the looper. WARNING: All the user memory will be erased and set to
factory settings, including the MIDI PC settings. The looper will automatically restart with factory settings.
To cancel the factory reset, remove power and restart the looper normally.
DC Pedals
is located in Florida and can be reached at www.dcpedals.com. All DC Pedals products are
designed and manufactured in the USA! Thanks for your business.
Summary of Contents for 5-Channel Bluetooth Looper
Page 1: ...User Manual...
