background image

DecLaratIon of

conforMIty

manufacturer’s Name: 

dbx professional products

manufacturer’s Address: 

8760 s. sandy parkway

 

 

  

sandy, utah 84070, usA

declares that the product:
 

product name: 

dbx 266xs

 

Note: product name may be suffixed by the eu. 

product option:   None
conforms to the following product specifications:
 

safety:   iec 60065 -01+Amd 1

  

 

emc:   eN 55022:2006 (N/A; Analog product) 

 

 

 iec61000-4-2

 

 

 iec61000-4-3

 

 

 iec61000-4-4

 

 

 iec61000-4-5

 

 

 iec61000-4-6

 

 

 iec61000-4-8

 

 

 iec61000-4-11

supplementary information:
the product herewith complies with the requirements of the:

 

Low Voltage directive 2006/95/ec

 

emc directive 2004/108/ec.

 

rohs directive 2002/95/ec

 

Weee directive 2002/96/ec 

With regard to directive 2005/32/ec and ec regulation 

1275/2008 of 17 december 2008, this product is designed, 

produced, and classified as professional Audio equipment and 

thus is exempt from this directive.

 

 

roger Johnsen 

 

 

 

Vice president of engineering          

        

 

 

 8760 s. sandy parkway 

 

 

 

 

sandy, utah 84070, usA

 

 

date: November 1, 2010

european contact:  Your local dbx sales and service office or
 

 

 harman music Group

 

 

 8760 south sandy parkway

 

 

 sandy, utah  84070,  usA

 

 

 ph: (801) 566-8800

 

 

 Fax: (801) 568-7583

eLectroMaGnetIc

coMPatIBILIty 

this unit conforms to the product specifications noted on the 

Declaration of Conformity

. operation is subject to the following two 

conditions:

•   this device may not cause harmful interference, and 
•   this device must accept any interference received, including  

interference that may cause undesired operation.  

operation of this unit within significant 
electromagnetic fields should be avoided.

•  use only shielded interconnecting cables.

u.K. MaInS PLuG WarnInG

A molded mains plug that has been cut off from the cord is unsafe. 
discard the mains plug at a suitable disposal facility.

NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU 
INSERT A DAMAGED OR CUT MAINS PLUG INTO A 13 
AMP POWER SOCKET.

do not use the mains plug without the fuse cover in place.  
replacement fuse covers can be obtained from your local retailer.  
replacement fuses are 13 amps and must be AstA approved to 
Bs1362.

If you want to dispose this product, do not mix it with general household waste.  There is a 
separate  collection  system  for  used  electronic  products  in  accordance  with  legislation  that 
requires proper treatment, recovery and recycling.

Private household in the 25 member states of the EU, in Switzerland and Norway may return their used 
electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar 
new one).
For Countries not mentioned above, please contact your local authorities for a correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and 
recycling and thus prevent potential negative effects on the environment and human health.

IMPORTANT SAFETY INFORMATION

Summary of Contents for 266xs

















Reviews: