9
Specifications
Input
Connectors:
Female XLR and 1/4” TRS (Pin 2 and tip hot)
Type:
Electronically balanced/unbalanced, RF filtered
Impedance:
Balanced > 50 k
Ω
, unbalanced >25 k
Ω
Max Input Level:
> +24 dBu balanced or unbalanced
CMRR:
40 dB; Typically >55 dB at 1 kHz
Output
Connectors:
Male XLR and 1/4” TRS (Pin 2 and tip hot)
Type:
Servo-balanced/unbalanced, RF filtered
Impedance:
Balanced 60
Ω
, unbalanced 30
Ω
Max Output Level:
> +21 dBu, >+20 dBm balanced/unbalanced
System Performance
Bandwidth:
20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response:
0.35 Hz to 200 kHz, +0/-3 dB
Noise:
< -94 dBu, unweighted, 22 kHz measurement bandwidth
Dynamic Range:
> 118 dB, unweighted
THD+Noise:
0.009% typical at +4 dBu, 1 kHz unity gain
0.09% typical at +20 dBu, 1 kHz, unity gain
< 0.1% any amount of compression up to 40 dB, 1 kHz
IMD:
< 0.1% SMPTE
Interchannel Crosstalk:
< -85 dB, 20 Hz to 20 kHz
VCA:
dbx V2™
Stereo Coupling:
True RMS Power Summing
Compressor
Threshold Range:
-40 dBu to +20 dBu
Ratio:
1:1 to
∞
:1
Threshold Characteristic:
Selectable OverEasy® or hard knee
Attack/Release Characteristic: AutoDynamic™
Attack Time:
Program-dependent, typically 15ms for 10 dB, 5 ms for 20 dB, 3 ms for 30 dB
Release Time:
Program-dependent, typically 125 dB/sec
Output Gain:
-20 to +20 dB
Limiter
Threshold Range:
+4 dBu to +22 dBu (off)
Ratio:
∞
:1
Limiter Type:
PeakStopPlus™ two-stage limiter
Stage 1:
Instantaneous Transient Clamp™
Attack Time:
Zero
Release Time:
Zero
Stage 2:
Intelligent Predictive Limiting™
Attack Time:
Program-dependent, typically <5 msec
Release Time:
Program-dependent, typically 22 dB/sec
Function Switches
OverEasy®:
Activates the OverEasy® compression function.
I/O Meter:
Switches between monitoring input and output levels on the Input/Output Level meter.
Bypass:
Activates the direct input-to-output hard-wire bypass.
Operating Level (rear panel):
Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels.
Stereo Couple:
Couples channels in stereo pairs. Channels One and Three become the master channels.
Indicators
Gain Reduction
8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB
Input/Ouptut Level
8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu
Limiter Threshold:
1 LED to indicate PeakStopPlus™ limiting
Function Switches:
LED indicator for each front-panel switch
Specifications
