47
ES-1203
Cod. 420120253 REV. 1.0
Figure 6
Figure 4
Figure 3
B. You can change the digital steering of the tops by
selecting and pressing [5] after you have confirmed
a MONO or DOUBLE COLUMN STEREO configuration,
choosing from:
• UP
(upwards)
• FAR
(no angle)
• DOWN
(downwards)
Press [5] again to confirm your chosen option
(e.g. figure 3)
C.
Select and confirm MAIN LEVEL (figure 4) to increase
or decrease the overall ES1203 system volume.
D.
Select and confirm the desired input to access the
corresponding sub page. The available inputs are:
• CH1
• CH2
• CH3
• BLUETOOTH®
The CH2 and CH3 inputs are initially set as a
single stereo channel (L+R). Once you have
accessed the sub page, you can use them as
two separate mono channels by selecting the
input type.
Figure 5
The table below shows the adjustable parameters for
inputs CH1, CH2 and CH3:
While choosing the configuration,
left and right arrows appear
under the system diagram.
While choosing the steering,
up and down arrows appear
under the system diagram.
NAME
PARAMETER
RANGE
GAIN
INPUT GAIN
[0, 10, 20] dB
LEVEL
OUTPUT LEVEL (SENT TO THE INTERNAL MIXER)
-∞ ÷ 3 dB
TYPE
INPUT TYPE
CH1: MIC/INST - CH2,
CH3:MIC/LINE
EQ
FILTERS THAT CAN BE APPLIED TO MICROPHONE, INSTRUMENT OR LINE
INPUTS
SEE THE TABLE ON
PAG. 48
AUX
AUXILIARY SEND MIXER (NOT AVAILABLE IN THE DOUBLE COLUMN
CONFIGURATION)
-∞ ÷ 3 dB
SEE: INPUT, OUTPUT AND AUX
MIXERS PARAGRAPH
PAN
PANNING EFFECT (NOT AVAILABLE IN THE MONO CONFIGURATION)
L ÷ R
