ROIP302 Series User menu
6
Device Configuration Via Built-in Web Server
The built-in web server provides a comprehensive way to fully program the device manually.
6.1
Web Server Login
There are two methods to access the built-in web server.
Method 1 is to access the built-in web server via the LAN port. Connect a computer to the
LAN port of the RoIP302 and configure its IP to 192.168.8.x (x = 2 to 254). Type the IP
address 192.168.8.1 in the address field of a web browser. The following login window is then
-displayed.
Enter the User name and the Password now. The user name for the administrative level is
“admin” and the default password is “admin”.
Please make sure to click on “Save Changes” after configuring the device.
Method 2 is to access the built-in web server via the WAN port. The WAN port is set to DHCP
mode as a default factory setting. When it is first connected to a network with a DHCP host, it
obtains an IP address automatically from the host. In order to listen to the IP obtained, make a
call to the GSM SIM card number. Once the call is answered, the device plays a voice prompt
to ask for password. Dial “*00” and the device then reads out the WAN port IP address.
www.dbltek.com
