Http://www.dbltek.com VoIP FXS+PSTN Gateway
21
host, This allows the HT-812P to obtain all related network information / settings from
the DHCP host.
2.
Static IP
– This mode sets the LAN port IP manually which can either be a public or
private IP. Other network settings (Subnet Mask, Default Route, Primary DNS,
Secondary DNS) should also be entered accordingly.
3.
PPPoE
– This selection is intended for broadband connection (ADSL / Cable modem)
that requires dial up / authentication using PPPoE protocol. Both
User Name
and
Password
are required. Please consult your service provider for more information if
needed. One advantage with the PPPoE dial up is that the IP address obtained for
the LAN port is normally a public IP.
More advanced parameters for
802.1q VLAN
and
MAC
settings are available. Please
consult your network administrator for assistance if needed.
PC PORT
– The PC port is intended to provide an Ethernet connection to other network
devices (for example: PC, network HUB.). Two modes of operation are available:
1.
Bridge mode
- This mode allows the network traffics at the PC port to be bypassed to
LAN port. This means that the network device share the same network segment as
the LAN port. There is no IP address assigned to the PC port.
2.
Fixed IP
- This mode sets the PC port
IP Addresss
(private IP) and
Subnet Mask
manually. This creates a new network segment for the network devices connected
to the PC Port.
