3
WARNING:
This product is part of a personal fall arrest system. The user must follow the manufacturer’s
instructions for each component of the system. These instructions must be provided to the user of this
equipment. The user must read and understand these instructions before using this equipment. Manufacturer’s
instructions must be followed for proper use and maintenance of this equipment. Alterations or misuse of this
product or failure to follow instructions may result in serious injury or death.
IMPORTANT:
If you have questions on the use, care, or suitability of this equipment for your application,
contact Capital Safety.
IMPORTANT:
Before using this equipment, record the product identi
fi
cation information from the ID label in the
Inspection and Maintenance Log at the back of this manual.
DESCRIPTION:
This Wire Rope Grab is intended to be used as part of a personal fall arrest system or restraint system. The wire
rope grab provides a portable lanyard connection point on a wire rope lifeline.
Note: This wire rope grab is not
designed to follow the worker.
If repositioning on your lifeline is required, you must manually reposition the
wire rope grab at the desired location.
Figure 2 – Static Wire Rope Grab Components
A
D
E
B
C
A
- ID/Warning Label
B
- Wedge/Handle Assembly
C
- Attachment D-ring
D
- Detent Pin
E
- Lifeline
