![DBI SALA FlexiGuard 8517714 User Instruction Manual Download Page 6](http://html1.mh-extra.com/html/dbi-sala/flexiguard-8517714/flexiguard-8517714_user-instruction-manual_3992123006.webp)
6
NOTE:
Large throat opening snap hooks should not be connected to standard size D-rings
or similar objects which will result in a load on the gate if the hook or D-ring twists or
rotates. Large throat snap hooks are designed for use on fixed structural elements such
as rebar or cross members that are not shaped in a way that can capture the gate of the
hook.
C.
In a false engagement, where features that protrude from the snap hook or
carabiner catch on the anchor, and without visual confirmation seems to be
fully engaged to the anchor point.
D.
To each other.
E.
Directly to webbing or rope lanyard or tieback (unless the manufacturer’s
instructions for both the lanyard and connector specifically allows such a
connection).
F.
To any object which is shaped or dimensioned such that the snap hook or
carabiner will not close and lock, or that roll-out could occur.
G.
In a manner that does not allow the connector to align properly while under
load.
Figure 3 - Inappropriate Connections
3.0 OPERATION AND USE
WARNING:
Consult DBI-SALA when using this equipment in combination with components or
subsystems other than those described in this manual. Some subsystem and component combinations
may interfere with the operation of this equipment. Use caution when using this equipment around
moving machinery, electrical hazards, chemical hazards, and sharp edges.
3.1 BEFORE EACH USE:
Inspect this equipment carefully to ensure it is in good
working condition. Check for worn or damaged parts. Ensure all parts are present
and secure. Check the entire system for damage and corrosion. See Section 4.0
for further inspection details. Do not use if inspection reveals an unsafe condition.
3.2 PLANNING:
Plan your system and how it will function before starting your work.
Consider all factors that affect your safety during use. Some important points to
consider when planning your system are:
A. HAZARD EVALUATION:
Evaluate job site hazards prior to starting work.
Consult applicable OSHA (or CE) and industry standards for guidelines and
regulatory requirements on issues such as personal fall arrest systems (PFAS).