background image

4

1.0   APPLICATIONS

1.1  PURPOSE:  Personal Protective Equipment against falls from a height.

 

The adjustable Ladder Fall Arrest System (Ladder FAS) with Fall Protection 

combines easy access to elevated work areas with fall protection from the ground 

for the duration of the work being performed. Each unit includes two collapsible 

masts. Each mast has an attachment point for the anchorage of a Personal Fall-

Arrest System (PFAS). The assembly can be moved by hand, by a forklift or towed 

by a maintenance vehicle when equipped with proper accessories.

1.2 LIMITATIONS:

 The following application limitations must be considered before 

using this product. Failure to observe product limitations could result in serious 

injury or death.

A.   ASSEMBLY: 

The ladder system must be assembled in accordance with the 

requirements stated in the appropriate Instructions Manual for the product. 

B.   CAPACITY:

 The maximum working load for this product is two persons with a 

combined weight of 310 lbs. (141 kg) per person (per attachment point; see 

Davit, Number 12 in Figure 1).

C.  PERSONAL FALL ARREST SYSTEMS:

 Personal fall arrest systems used with 

the Ladder FAS must meet applicable state and federal regulations, or CE 

regulations, and the requirements stated in Section 3.3.

D.  PHYSICAL AND ENVIRONMENTAL HAZARDS: 

Use of this equipment in 

areas with physical or environmental hazards may require that additional 

precautions be taken to reduce the possibility of damage to this equipment 

or injury to the user. Hazards may include, but are not limited to: high heat 

(welding or metal cutting), acid or caustic chemicals, corrosive environments 

such as exposure to seawater, high voltage power lines, explosive or toxic 

gases, moving machinery or sharp edges. Contact DBI-SALA if you have 

questions about the application of this equipment in areas where physical or 

environmental hazards are present.

E.  TRAINING:

 This equipment is to be assembled, installed and used by persons 

who have been trained in its correct application and use. 

1.3

  

STANDARDS

: Refer to national standards, including the ANSI Z359 family of 

standards .0, .1, .2, .3, and .4, local, state, and OSHA requirements for more 

information on the application of this and associated equipment.   

WARNING:

 Do not alter or intentionally misuse this equipment.

WARNING:

 It is essential for the safety of the user that if the Ladder Fall Arrest System (Ladder FAS) 

is resold outside the original country of destination the reseller shall provide instructions for use, 

maintenance, periodic examination and repair in the language of the country in which the product is to 

be used.

MEDICAL WARNING:

 Working at height has inherent risks. Some risks are noted here but 

are not limited to the following: falling, suspension/prolonged suspension, striking objects, and 

unconsciousness. In the event of a fall arrest and/or subsequent rescue (emergency) situation, some 

personal medical conditions may affect your safety. Medical conditions identified as risky for this type 

of activity include but are not limited to the following: heart disease, high blood pressure, vertigo, 

epilepsy, drug or alcohol dependence, psychiatric illness, impaired limb function and balance issues. We 

recommend that your employer/physician determine if you are fit to handle normal and emergency use 

of this equipment.

Summary of Contents for FlexiGuard 8517714

















Reviews: