6
A.
3,000 pounds (13.3kN) for non-certified anchorages, or
B.
Two times the foreseeable force for certified anchorages.
When more than one work positioning system is attached to an anchorage, the strengths set forth in (A) and
(B) above shall be multiplied by the number of systems attached to the anchorage.
3.0 OPERATION AND USE
WARNING:
Do not alter or intentionally misuse this equipment. Consult DBI-SALA when using this equipment
in combination with components or subsystems other than those described in this manual. Some subsystem
and component combinations may interfere with the operation of this equipment. Use caution when using this
equipment around moving machinery, electrical hazards, chemical hazards, and sharp edges. Do not loop the
lanyard around small structural members.
WARNING:
Working at height has inherent risks. Some risks are noted here but are not limited to the following:
falling, suspension/prolonged suspension, striking objects, and unconsciousness. In the event of a fall arrest and/
or subsequent rescue (emergency) situation, some personal medical conditions may affect your safety. Medical
conditions identified as risky for this type of activity include but are not limited to the following: heart disease,
high blood pressure, vertigo, epilepsy, drug or alcohol dependence, psychiatric illness, impaired limb function
and balance issues. We recommend that your employer/physician determine if you are fit to handle normal and
emergency use of this equipment
3.1 BEFORE EACH USE
of this equipment, carefully inspect it to assure that it is in good working condition.
Check for worn or damaged parts. Ensure all hardware is present and secure, and is not distorted or have
any sharp edges, burrs, cracks, or corrosion. Ensure self-locking snap hooks or carabiners work properly.
Inspect rope or webbing for wear, cuts, burns, frayed edges, breaks, or other damage. See section 5.0 for
further inspection details. Do not use if inspection reveals an unsafe condition.
3.2 PLAN
your fall protection system before starting your work. Take into consideration factors that affect
your safety before, during, and after a fall. The following list gives some important points to consider when
planning your system:
A. ANCHORAGE:
Select a rigid anchorage point that is capable of supporting the required loads. See
section 2.3. The anchorage location must be carefully selected to reduce possible free fall and swing
fall hazards and to avoid striking an object during a fall. The anchorage should be generally level
(horizontal) to prevent the anchorage connector from sliding down an incline when in use, which could
cause serious injury to the user.