25
CURVE4
CURVE5
CURVE6
Save the set-up
Press [SAVE] button to save the 3 setting mentioned above: sensitivity/crosstalk
rejection/striking force.
Local control
1). Press [SET UP] button to enter into the local setting. It shows the local control status:
Lon for ON or
Lof
for OFF. Use [-DATA+] button to switch. Refer to the following
figure for the local control setting:
MIDI signal
Sound module
Local control: used to control the connection of trigger detection and the audio source
sequencer. In the default ON status, the two modules are connected. Strikingthe pad
will generate sound and it outputs the relative MIDI signal. When this function is turned
off, the audio source module will not be controlled by the trigger directly, but will controlled
by the MIDI input signal.