SOUND MODULE
10
BOTTOM PANEL
P O W E R
O F F O N
D C 9 V
U S B
T R I G G E R
HEADPHONE
LINE OUT
L I N E I N
1
2
3
4
5
6
7
(1) Power Switch:
Turn On/Off the sound module
Note
:
After you turn the power off, do not turn it on immediately. Wait at least five seconds so that the elec-
tronic circuits can be properly reset.
(2) Power In Jack:
Plug in the DC cable of the attached adaptor
(3) USB Jack:
The USB connector allows you to connect the drum directly to your computer
’s USB port.
The USB interface is compatible with Windows XP/Vista, Windows 7 and MAC. The computer will recognize
the drum as Audio Device.
(4) Pad Trigger Connector:
Each pad and Hi-Hat control pedal have labeled cables. All cables are merged
into a single connector. Plug the cable into the jack of the corresponding component, and then plug in the
connector here.
(5) Headphone Jack:
The drum has a stereo headphone jack. You can play in total silence without disturb-
ing others in the room by plugging a set of headphones into the socket.
(6) Line Out Jack:
There is no built-in speaker in the drum. Line Out of stereo audio output delivers the drum
output signal to external amplification, such as home stereo, PA system or other stand alone amplifiers. If you
connect to an external mono system, stereo/mono adapter is recommended.
(7) Line In Jack:
Line In of stereo audio input jacks will mix the supplied signal with the internal drum sound.
It can be used to connect to items such as CD players, MP3 player etc.
