dB-technologies’s products are fully compliant with the relevant Standard Regulations. In most countries,
nevertheless, wireless systems must be approved for use by the Authorities and may be necessary to obtain a licence
to use it legally. Your local dealer will be able to give you details on wireless system regulations for your area.
19
IEM2200 Technical Specification
Transmitter
Transmitter size:
Rack-mounting (19”), 1 u (1.75”), 9” deep (max.)
Transitter weight:
2 Kg approx./4.5 1bs
Power input:
12 Volts a.c. @ 250mA 50/60 Hz
Inputs
:
Electronically balanced, Neutrik
Combo™ XLR
connectors (pin 2=hot, pin 3=cold)
Link outputs:
6.3mm
(
¼”) jack sockets (tip=hot, ring= cold)
Sensitivity
:
0 dBV / 600 Ohms nominal
Frequency response:
50 Hz to 15kHz ± 3dB
Distortion:
<
1%
Level control:
Dual adjustment for individual control over left &
right
inputs
Metering:
Input level bargraph display for each channel.
Monitor output:
6.3mm and 3.5mm stereo jack sockets and stereo
volume
control, 250
Operating frequency:
16 pre-programmed frequencies*
RF output power:
25mW e.r.p. as measured in accordance with ETS300 422
Modulation:
frequency modulation ± 35KHz nominal deviation
dynamics control:
Variable ratio compressor
Antenna:
¼ wave ship
Temperature range:
-10°C to +50°C
