DB Drive WDX GO Series, User Manual

Page: 6 / 8

1 X 4Ω DVC
SUBWOOFER
2 X 4Ω DVC
SUBWOOFER
4 X 4Ω DVC
SUBWOOFER
3 X 4Ω DVC
SUBWOOFER
4Ω
4Ω
2Ω
4Ω 4Ω
4Ω 4Ω
4Ω
4Ω 4Ω 4Ω
2.66Ω
4Ω 4Ω 4Ω
4Ω 4Ω
4Ω 4Ω
4Ω 4Ω
4Ω 4Ω
2Ω
4Ω DVC WIRING CONFIGURATIONS
6
You can change the wiring configuration of your speakers ( Series, Parallel and Series / Parallel ) to match
the impedance loads that maximize the power output of your amplifier. Wiring the same woofer or
multiple woofers in these three different wiring configurations will result in different impedance loads.
Series: Is the method of wiring of alternate positive with negative terminals ( string method )
( Illustration below ).
Parallel: Is the method of wiring where you wire match 2 speaker terminals with positive to positive
terminal and negative to negative. ( Illustration below ).
Series/Parallel: This configuration is a combination of both series and parallel. We recommend wiring in
series for the terminal and parallel for the leads to the amp. ( Illustration below ).
DVC WIRING CONFIGURATIONS
4Ω
4Ω
1Ω
4Ω
2 X 4Ω DVC
SUBWOOFER