PRODUCT DIMENSIONS
WDX8G0.4
WDX10G0.4
WDX12G0.4
Frame
Diameter:
8.42 in.
(
214 mm
)
Cutout
Diameter:
Mounting
Depth:
10.70 in.
(
272 mm
)
6.90 in.
(
175.38 mm
)
12.40 in.
(
315 mm
)
4.62 in.
(
117.50 mm
)
5.84 in.
(
148.50 mm
)
6.51 in.
(
165.50 mm
)
9.07 in.
(
230.57 mm
)
10.85 in.
(
275.79 mm
)
RECOMMENDED ENCLOSURES
The purpose of the information below is to help you select the most appropriate type of enclosure for your
application. We have selected the two most popular enclosure types and their performance benefits.
Sealed Enclosure:
(Air-Suspension design): Characteristically simpler to make, sealed enclosures usually are
better at controlling the woofer’s excursion and performance at lower frequencies. The added control allows for
higher power handling or the use of a bigger amplifier. The secret is to maintain a perfect seal. Using glue and
sealants at all seams is recommended to prevent leaks and integrity of the enclosure. The size or volume of the
enclosure will directly affect the performance of the woofer. Smaller enclosures generally provide the desired
bump to the frequency response curb and Greater SPL. Larger enclosures will provide a lower but flatter
response for deeper bass. In general, the benefit of the sealed enclosure versus a ported enclosure is a smaller
footprint, simpler build with higher power handling, a more linear flat response, superior sound quality and
extended low frequency output.
Ported Enclosure:
(Bass-Reflex or Vented): A ported enclosure is simply a sealed enclosure with a port or vent
added to the sealed design for the purpose of tuning the enclosure to higher output at the desired tuned
frequency, typically 3db or higher. Another advantage of a ported enclosure is the reduction of cone motion for
the speaker, thus distortion at higher power levels within the tuned frequency response of the port. A drawback
is that building a ported enclosure is more complex than a sealed enclosure. Having the wrong port or vent could
result in poor sound, and the potential of damaging a woofer when played too loud or out of the tuning
frequency. Thus, we recommend not guessing, please follow the guidelines listed in this manual or go to a
professional. In General, the benefit of a ported enclosure versus a sealed enclosure is higher volume output at
the tuned frequency and stronger bass output with lower power input.
Construction
: We recommend using ¾” MDF (Medium Density Fiberboard) for the construction of an enclosure.
It is critical for the side walls of the enclosure not to flex due to the pressure generated by the woofer, bracing
might be required. The enclosure sides should be secured together with nails/screwed. We also recommend the
use of glues and sealants to maintain the integrity of the enclosure and eliminate leaks.
A
B
C
A
B
C
A
B
C
Frame Diameter
Mounting Depth
Cutout Diameter
4
Summary of Contents for WDX GO Series
Page 7: ...7 NOTES...
