Raider-Classic 150 (Oil-cooled&Internal Gearbox): Service Manual (single/ double-seat) EEC Version;3.0 Feb..2005
27
e) Replace the valve cover gasket;
Mount the cover.
f) Tighten the valve cover-positioning bolt
3.6 Rocker Arm and Rockshaft
3.6.1 Removal
a) Remove the camshaft holder;
b) Take out the rockshaft by removing the bolt;
c) Remove the rocker arm.
3.6.2 Inspection
a) Inspect if there is any abrasion or damage on the rocker arm and rockshaft or if the oil hole
is clogged.
b) Measure the inner diameter of the rocker arm. Service limit 10.10 mm
c) Measure the outer diameter of the rockshaft. Service limit 9.91 mm
3.6.3 Installation
a) Read the "EX" mark on the camshaft holder, then mount the exhaust port rocker arm and the
rockshaft.
b) Mount the inlet port rocker arm and rockshaft.
3.6.4 Cam Chain Tensioner
The chain tensioner must be in good working order for the proper chain tension.
1.Cam chain 2.Tensioner
3.Lifter 4.Gasket
5.Pivot 6.Chain guide
7.Bolt 8.Screw pan
9,10 O-ring
The valve cover gasket must be mounted properly in
the groove.
If there is abrasion on the surface of the rocker arm, the camshaft should also be
inspected.
Apply some oil on the rockshaft before mounting it on.
Summary of Contents for Raider-Classic 150
Page 1: ......
