1 |
Daytronic Model 4500 Quick Reference Guide
WARNING
Death, serious injury, or fire hazard could result from improper
connection of this accessory. Read and understand these instructions
and the applicable Daytronic Original Equipment User Guide before
connecting this accessory. Follow all installation and operating
instructions while using this accessory.
Connection of this instrument must be performed in compliance with the
National Electrical Code (ANSI/NFPA 70-2008) of USA and any
additional safety requirements applicable to your installation.
Installation, operation, and maintenance of this instrument must be
performed by qualified personnel only. The National Electrical Code
defines a qualified person as “one who has the skills and knowledge
related to the construction and operation of the electrical equipment and
installations, and who has received safety training on the hazards
involved.”
Qualified personnel who work on or near exposed energized electrical
conductors must follow applicable safety related work practices and
procedures, including appropriate personal protective equipment, in
compliance with the Standard for Electrical Safety Requirements for
Employee Workplaces (ANSI/NFPA 70E-2009) of USA and any
additional workplace safety requirements applicable to your installation.
Published by Daytronic Corporation
2566 Kohnle Drive
Miamisburg, Ohio 45342 USA
Telephone: 1-800-668-4745 or 937-866-3300
Fax: 937-866-3327
Web site: www. daytronic.com
Copyright ©2010 Daytronic
All rights reserved.
No part of this book may be reproduced, stored in a
retrieval system, or transcribed in any form or by any
means
—electronic, mechanical, photocopying, recording,
or otherwise
—without prior written permission from the
publisher Daytronic, Ohio 45342 USA.
Printed in the United States of America.
P/N QR-4500 Rev. A
04.12.10
