background image

SAFETY INSTRUCTIONS

WARNING! 

TO REDUCE THE RISK OF

FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN 

OR MOISTURE. 

CAUTION! 

TO REDUCE THE RISK OF

SHOCK, DO NOT REMOVE THE COVER,

NO USER SERVICABLE PARTS INSIDE.

REFER SERVICE TO A DAYTON AUDIO 

AUTHORIZED DEALER. 

IMPORTANT SAFETY INSTRUCTIONS

 

• Read and keep these instructions. 
• Heed all warnings and follow all instructions contained within this manual. 
• Do not use this unit near water. 
• Clean only with dry cloth. 
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including 

amplifiers) that produce heat.

 

daytonaudio.com

 

[email protected]

 

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

 

!

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades 

with one wider than the 

other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. 
If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and 

the point where they exit 

from the unit. 

• Only use attachments/accessories specified by the manufacturer. 
• Unplug this unit during lightning storms or when unused for long periods of time. 
• Refer all servicing to qualified service personnel. Servicing is required when the unit has been 

damaged in any way, such as when the 

power-supply cord or plug is damaged, liquid has been spilled, or objects have fallen into the unit, the unit has been exposed to rain or 
moisture, does not operate normally, or has been dropped. 

• Operate the unit only with the voltage specified on the rear. Fire and/or electric shock may result if a 

higher voltage is used. 

• Do not modify, kink, or cut the power cord. Do not place the power cord in close proximity to heaters and 

do not place heavy objects

on the power cord and/or the unit itself, doing so may result in fire or electrical shock. 

• Do not touch the speaker 

terminals as electric shock may result.

 

 

• Ensure that the safety ground terminal is connected to a proper ground. Never connect the ground to a gas 

pipe, as a severe explosion

and/or fire may result. 

• Be sure the installation of this product is stable, avoid unlevel surfaces as the product may fall and cause 

injury, property damage, 

electrocution and/or fire. 

• Note that when the unit is turned off, it is not completely disconnected from the AC power outlet. Do not open 

the cover. 

REFER ALL  SERVICE TO A QUALIFIED SERVICE TECHNICIAN

 

Summary of Contents for DAX66



















Reviews: