4
INSTALLATION PROCEDURE (Continued)
2. MOUNT THE WALL BRACKETS
2.1
Use a Wall Bracket as a guide to mark the
fixing hole positions for one side of the
clothesline.
(See Figure 2A)
Make sure to align the top hole of the Wall
Bracket with your height marker. Ensure that
the holes are vertically level. (See Figure 2B)
2.2
Drill the marked hole positions to suit your
wall fasteners.
If you are using an anchor bolt, tap the bolt
into the holes as per the manufacturer’s
instructions. Alternatively, if you are using an
anchor screw, insert the screw slightly into
the hole to complete step 2.3.
2.3
To mark the second wall bracket location,
slide one end of the Wall Attachment
Template over the top fixing
(See Figure 2C),
pull tight and to the side
(See Figure 2D)
and
mark the wall bracket centre distance
(See Figure 2E).
Ensure that the template is level and taught before
marking the location.
Note: we always recommend to confirm the correct
hole position with a tape measure and spirit level
before drilling. Confirm measurement against
Figure 1.
2.4
Mark both fixing hole positions for the
second side of the clothesline using the
Wall Bracket as a template
(See Figure 2F).
Drill the marked holes to suit your fixings.
2.5
Secure both Wall Brackets firmly to
the wall.
(See Figure 2G).
IMPORTANT!
Ensure the head of the wall
fixings do not protrude more than 13mm.
2A
2C
2F
2G
2B
2D
2E
13mm
