background image

 

UpMix User Manual 

 
 

Important Safety Information 

 

 

Indoor use only.  Not for use in wet or damp environments. 

 

Maximum Relative Humidity: <80% 

 

Class I Equipment (grounded type) 

 

Electrical rating: 100-260V~50/60Hz 25W max 

 

AC Mains supply voltage fluctuations are not to 10% of the nominal voltage 

 

Operations temperature range -40

C to 70

 

Maximum altitude: 3000m (9843ft) 

 

Equipment suitable for continuous operation 

 

Weight: 3.6kg (8.0lbs) equipment only; 5.4kg (12.0lbs) shipping 

 

Important Note: Please connect your UpMix to an uninterruptible power supply (UPS) to provide 
other protection against power surges and low-voltage conditions. 

 
 

Service Information 

 

The DaySequerra UpMix contains no user serviceable components inside the unit.  Please contact 
DaySequerra for repair and upgrade information.  In the event that your unit needs to be returned to the 
factory, contact us for a return authorization number.   

Please visit www.daysequerra.com and 

register your new UpMix so we can keep you informed of the latest hardware and software 
updates.  
 
The lightning flash with arrowhead symbol is intended to alert the user to the presence of un-
insulated “dangerous voltages” within the product’s enclosure that may be of a sufficient level 
to cause harm.  
 

The exclamation point within a triangle is intended 
to alert the user to the presence of important 
operating and maintenance instructions within the 
product literature. 
 
Exposed portions of the power supply assembly 
are electrically live. To reduce risk of electric 
shock, the power cord must be disconnected when 
the power supply assembly is removed. For 
continued protection against electric shock, a 
correctly wired and grounded (earthed) three-pin 
power outlet must be used. Do not use a ground-
lifting adapter and never cut the ground pin on the 
three-prong plug. The ground terminal of the power        
plug is connected directly to the chassis of the unit.

 

 

 

 

 

Summary of Contents for UpMix























Reviews: