DaySequerra UpMix, Quick Start Manual

Page: 17 / 22

UpMix User Manual
15
Network Menu
The DaySequerra UpMix has several configurable network settings. All of UpMix’s network settings are
password protected. The password to change the network settings is
upmix123 . Please take note
when entering the password that the UpMix password is case sensitive. The DaySequerra UpMix is
configured to take a DHCP address by default.
Device Name:
Allows you to change UpMix’s name as reported to DNS. Press ENTER while the cursor
is over this field to go into data entry mode. Turn the knob to scroll through the available choices of
letters (A-Z, 0-9 and _ (underscore)) and press enter to move on to the next field. Turning the knob
again will start to scroll through the choices for the next letter, or pressing ENTER accepts the name.
DHCP: Configures UpMix to look for a DHCP server for IP configuration. (Enabled or Disabled)
IP Address:
If DHCP is set to disabled, allows you to enter the desired IP address manually. Press
ENTER while the cursor is over this field to go into data entry mode. Scroll through the available
numbers (0-255) and press ENTER to move to the next octet.
MAC Address: Displays UpMix’s MAC address if needed for firewalls or DHCP IP address
assignments.
Diagnostics Menu
Current Faults:
Displays any error states that UpMix may be in.
DSP Utilization:
Shows the current load on UpMix’s processor.
LED Test:
Turns on all front-panel LED indicators to verify their functionality.
Meter Brightness:
Allows adjustment of UpMix’s Input and Output meters intensity.
Display Brightness:
Allows adjustment of UpMix’s display output intensity.
Restore Settings:
Returns all settings to their factory default values and reboots the unit. Network
settings will not be lost.
GPIO Test:
A sub-menu that can turn on the GPIO outputs for testing and shows the current state of
the GPIO inputs.
Alarms Menu
AES Lock:
Allows the AES Lock alarm to be suppressed.
PSU Alarm:
Allows the Power Supply alarm to be suppressed.