29
M4DDC User Manual
Webserver – Logging Tab
A log of TimeLock
TM
, Level Lock, Audio Phase, and Alarms may be exported in .csv format to an FTP
site for download. Data is only logged if it crosses beyond the threshold limits that are set in the ‘Log
Threshold’. Audio Phase and Alarms are always logged and do not have a threshold. Log categories
can be selectively enabled and disabled. Data is stored in a buffer until the set limit (KB) is reached.
The buffer will then upload the log to the defined FTP ‘Log Directory’. The unit will not log data unless
the Log Directory is enabled. An ‘Upload Log Now’ button is available to quickly upload any data that is
stored in the buffer to the directory. Each time this action is performed the log starts over. Logs are
saved with a timestamp, Device name and serial number.
Example of Log Condition > Enable - TimeLock
TM
. Setting the pull-down menus for each as follows:
Samples (pre) 50, Samples (post) 3. Considering the M4DDC is set to correct diversity delay. Pre and
Post correction data is compared to the threshold for each set in the Log Threshold. Pre correction
diversity delay that exceeds 50 samples will be logged. If the delay drifts back and forth from 50 it will
Saves the log to FTP every (x)
KB before clearing the buffer
and starting over again.
TimeLock
TM
, Level Lock, Audio Phase,
and Alarms must be enabled to log.
TimeLock
TM
and Level Lock will only
log data that reaches the set
conditions.
