66
Issued: 28.02.2005
Strider MD 4 Plus
Troubleshooting
16.0 Troubleshooting
16.1 Before troubleshooting
Switch the Strider off.
➨
Check the main plug (1) and the
battery plug (2) for a tight fit.
➨
Switch the Strider on again.
➨
Before you start troubleshooting, please
observe the following points to prevent
errors coming into the process.
If the fault occurs again, you will find
information about troubleshooting and
fault remedy in the following lists.
16.2 Troubleshooting
Fault
Cause
Remedy
Switch the scooter
on (chapter 7.4)
Battery not pluged
in
Front unit connector
not plugged in
Check the battery
fuses (chapter17.5)
Check fuse in
power supply to
tiller head
(chapter 17.5)
Charge the
batteries (chapter
11.0)
Replace batteries
(dealer)
Check blink code
(chapter 16.3)
no display at the dashboard
Scooter not
switched on
Power supply
interrupted
Batteries
discharged
Batteries
defective
Operation
indicator blinking
