background image

The Gatto Electric Bicycle User’s Guide 

TPS Training Bulletin 

Page 6

 

Riding Instructions 

This guide assumes that you already know how to ride a standard bicycle. Before you try to 
ride an electric bicycle, you should be very familiar with controlling and balancing a normal 
bicycle. 

Caution 

If you do not have cycling experience, an e-bike is too dangerous to 
ride. 

Do not

 begin learning to ride a bicycle using an e-bike. 

Important Notes 

 

E-Bikes are Fast!

 E-bikes are capable of traveling at higher speeds than many 

bicycle riders are accustomed to. Use caution at all times, especially when traveling 
in mixed traffic. Always take into account driving and traveling conditions. 

 

 

Obey the Law.

 Be sure to follow all provincial and city traffic laws. This includes 

obeying stop signs, checking carefully when turning, and riding defensively. An e-bike 
is a motorized vehicle, even though it is classed as a bicycle. You must follow the law. 

 

 

Stay Sober.

 Never ride your bicycle while intoxicated. An e-bike is capable of 

traveling faster than a normal bicycle, and you should always be in control of it. 

 

 

Share the Road.

 Be careful in mixed traffic. When on bicycle paths, traveling near 

pedestrians, or on recreational trails, try to be polite and courteous to those using the 
paths with you. E-bikes are new in most cities, so other users of the roads and 
recreational paths may not know how to deal with e-bike riders. Bear in mind that, in 
a sense, e-bike riders are “ambassadors” for this new method of transportation. 

Items to Carry with the E-Bike 

It is a good idea to carry the following items with you at all times when you ride your e-bike. 
 

 

The charger

, to charge the bike in case the battery power runs out 

 

A lock

, to secure your e-bike when you park it 

 

A helmet

, as required by safety laws 

Inspecting your E-Bike 

Always inspect your e-bike before you ride it, to make sure its safety features are operating 
properly. Many accidents can be avoided with routine inspections. 
 
Once you are comfortable with your e-bike, you will be able to detect small changes in the 
way it feels. If anything changes between uses, make sure to have it properly examined. 
Also, be sure to listen for changes in the sounds your e-bike makes over time. Any 
mechanical or power issues may have effects on the sounds the bicycle makes. 

 

Summary of Contents for Gatto


























Reviews: