15
Make sure the valve stem caps are secure. If needed, install a new cap. Always
check air pressure when your tyres are cold. If you check the air pressure when
the tyres are warm, you will get higher readings, if you let air out of warm tyres to
match the recommended cold tyre pressure, the tyre will be underinflated. The
correct cold tyre pressures are listed below. If you replace the tyre, follow the tyre
pressure marked on the sidewall of the tyre.
Item NO:
Front Tyre(Cold)
Rear Tyre(Cold)
E-ODIN 2.0
36PSI
22PSI
Tyre Inspection
A flat tyre or tyre blowout can be very inconvenient and can even cause you an
accident. Take the time to inspect your tyres and wheels before you ride. For
more information about handling a flat tyre, refer to the section of this manual
titled Resolving the Unexpected.
•Inspect the tyre carefully for bumps or bulges in the sidewall of the tyre and
inside of the threads. Replace any tyres that have bumps or bulges in them.
•Look closely for cuts, slits or cracks in the tyres. replace any tyre if you can see a
fabric or cord showing through. Check for rocks, screws nails or other objects
embedded in the tyres or thread. Remove any foreign objects.
•Inspect your rims.
WARNING
Never ride with a bent or dented rim. The tyre could suddenly lose pressure,
resulting in an immediate lose of control which may cause a serious accident.
10. Electrical schematic
