DAYGAS Radium 15, User Manual And Warranty

Page: 20 / 34

Step 4 - Reflector Assembly
Mount the aluminum reflectors by sliding them against the lower hanger apparatus.
Make sure that the reflector is fully seated on the suspension apparatus. Make the
adjustment so that the compression springs on the suspension apparatus are in full
contact with the reflector.
Step 5 - Final Check of Device
After all the assembly steps are completed, make the final durability test of the
device. Never start using the device without making sure that the whole assembly is
intact.
20
www.daygas.eu
Radium I Type
Assembly Steps