DAYGAS DSR Series, User And Installation Manual

Page: 9 / 32

Special Electronic Board
Connection Diagram
DSR Series
Design and Working Principle
DSR consists of one or two burners with mixing pipes in their housings. Devices
consisting of two burners are 38 KW and above devices. The mixing tube is
connected to the burner body by a connecting tube. The combustion process takes
place by sending the gas taken from the gas valve to the mixing pipes with a flex in
the burner body.
Ceramic tiles are compressed to the body of the boiler with wicks and fixed in such a
way that there is no gap between each other.
Reflective reflectors are placed at both ends of the boiler to prevent heat dissipation.
There is an ignition electrode at the bottom of the boiler.
The ignition electrode is fixed in its place with a specially designed screw
located at the bottom of the boiler. Its cables are covered with a heat-resistant,
special non-combustible sheath.
GAS VALVE
IONIZERS
GROUND
LIGHTERING
NEUTRAL - PHASE
HOUSE
9
www.daygas.eu