49
GB
Drainage
Self- evaporating system
The self-evaporating system uses the
collected water to cool the condenser coils
for better efficient performance. It is no
need to empty the drainage tank in cooling
operation except in drying operation and
high humidity conditions. The condensate
water evaporates at the condenser and
evacuated through the exhaust hose.
For continuous operation or unattended
operating in drying operation, please
connect the attached drain hose to the
appliance. Condensate water can be
automatically flow into a bucket or drain by
gravity.
• Switch off the appliance before
operating.
• Remove the plug of the water outlet
opening, and keep it in safe area.
• Securely and properly connect the drain
hose and make sure it is not kinked and
clear of obstruction.
• Place the outlet of hose over a drain or
bucket and ensure that water could freely
flow out of the appliance.
• Do not submerge the end of hose into
water; otherwise it can cause “Air Lock” in
the hose.
To avoid water spillage:
As the negative pressure of condensate drain
pan is large, tilt the drain hose downward
toward the floor. It is appropriate that the
degree of inclination should exceed 20
degrees.
Straighten the hose to avoid a trap existing
in the hose.
Remove the rubber sealing plug
Continuous drain hose
(inner diameter = 16 mm)