Power up the first computer, and then verify keyboard and mouse functionality. Repeat this process
for each of the attached computers.
If you find that the keyboard or mouse is not working correctly please verify that all cables are properly
connected, and that the HID drivers are loaded on the computer.
Rear Panel Layout 4-Port switch
Using the SCOUTusb
The SCOUTusb provides two methods to select the desired computer. You may use either the Select
button on the unit, or make use of the keyboard Hot Key commands.
You may notice that the mouse cannot be used for around 2 seconds when the SCOUTusb switches
to another computer. This is normal and is caused by the synchronization process which ensures that
the mouse operates correctly.
Selection buttons
2 Port: Pressing the Select button on the front panel cycles through computers 1 ~ 2.
4 Port: Pressing the individual PC buttons will switch the signal to the desired computer.
