Daxten GALAXY -, Installation And Operation Manual

Page: 7 / 16

7
Galaxy Tx1
UTP OUT VGA IN
Galaxy Tx4
OUT 3 OUT 2
OUT 4
OUT 1
VGA IN
Rear view of Galaxy TX 1and Tx4
Front view of Galaxy Tx4
UTP IN 9-24 V DC EQ GAIN
R G B
DC
9-20V
UTP in VGA out -
+
Front view of Galaxy RX 60
Distance label
Galaxy Rx60 DC jack connectors—
There are two DC jack connectors on the Rx60,
both of which can accept power supplies giving between 9-20vdc. The second jack
connector is available for use in contexts where a TFT screen, for example, is powered
by a 19vdc mains adapter. Since the Rx60 only uses 200ma, the TFT mains adapter
will normally be able to power the Rx60 as well. This is done by plugging the DC jack
from the TFT mains adapter (possibly with the help of a DC jack adapter) into one of
the Rx60 DC jack connectors. A jack-jack cable, which must be obtained from a
stockist or constructed from components, can then be used to take the 19vdc current
from the Rx60 to the TFT screen. This obviates the necessity of a second mains adapter
for the Rx60.
CONNECTORS ON GALAXY