Daxten GALAXY -, Installation And Operation Manual

Page: 10 / 16

10
Galaxy Transmitter and Galaxy receivers.
When planning large installations please chose the right boxes and configuration.
When working with Daisy chains please make a drawing with cable lengths of your
system and give the boxes a numbers so it is possible to locate the boxes on the
drawing. Write down the configuration for the box if it contains a delayline so you can
put in a spare box with the right settings.
Begin installation from the info-computer.
Connect a Galaxy Tx1 or Tx4 (without UTP-in module) to the Info-PC.
Put on a still test image on the info-computer.
A) Connect a Rx60 receiver to the first Galaxy. Connect a monitor to the Rx60;
adjust the R G B for the best picture.
B) OR Connect a Tx1/4 Repeater Station or a Rx125/300; adjust the EQ and Gain
for the best picture.
The Galaxy products are made in many versions for special requirements: With and
without UTP in modules, with and without delay lines.
The UTP in modules differ in equalizing: the 125M-module work with UTP lines up to
125M. For longer distances use the 300M Version with UTP-in for distances between
125 and 300 m
The 125M version has no inside distance switches.
The 300 version has inside switches for distance adjustment.
Galaxy Repeater station TX1/TX4 300M and Rx300
Please Notice! The distance of the cat5 cable is set by micro switches inside the Galaxy
Repeater 300M/Rx300.
BEFORE INSTALLATION
PROCEDURE FOR INSTALLATION
R G B
200-300 M
100-200 M
0-100 M
R
G
B
2
00
-3
00
M
1
00
-2
00
M
0
-1
00
M