7
Your water heater is a household device. In case of using industrial places, your
device will unguaranteed
Drill at least two holes of appropriate diameter from the bottom and top of the device
according to the measurements of the water heater mounting holes in the place
selected in accordance with the above mentioned conditions. Fix the appropriate
diameter fixing plug to the holes.
Drill 110 mm diameter waste gas pipe hole according to pipe dimensions given in the
figure below. (Waste gas pipes are provided with water heater.) All drilling must be
made before water heater install to wall. Precautions should be taken to prevent
wastes entering the water heater that occur during drilling.
After drilling pipe hole, Screw the water heater from up and down to holes that you
drill before. Screw more than point that is necessary.
5.2. Wall Installation Of Water Heater
