19
While the
and the
icons are visible on the screen (the device is operating for
central heating) by pressing
or
buttons heating temperature can be adjusted
between 35°C and 80°C. While the heater temperature is being adjusted the
“Water Temp”
text turns off, and the adjusted temperature value starts to flash.
While the device is operating for domestic water heating, you must stop the hot
water flow to adjust the heating temperature. In case the operation mode is set to
domestic water heating, it is necessary to switch the operation mode to central
heating in order to change the heating temperature. At the end of the process, the
device should be returned to its previous operating position. (Please see 6.4.8)
2 seconds after the adjustment is completed, the operating temperature and the
“Water Temp”
text are displayed on the screen. It may take time for the device to
reach the set temperature. Heating does not start immediately after the domestic
water heating is completed. For temperature compensation, the heating starts after
the pump has run for a while.
This setting can be made on UKDAX-xxEDT and UKDAX-xxEDM models that provide
domestic hot water. With the UKDAX-xxETT, UKDAX-xxETM and UKDAX-xxETP
models, domestic hot water can be supplied externally.
6.4.2. Adjusting the Heating Temperature
6.4.3. Domestic Hot Water Temperature Adjustment